Milling bit assortment/set Ruko 116008 35 pieces plain
TC milling bit set 35 pcs. 116008 Ruko
CTR-RUKO-116008-HM-D6,0
Register now and access more than 125,000 products
The cross-toothing results in a higher chip performance compared to plain toothing. This has a positive effect, especially with materials that are difficult to machine.
35 pieces carbide milling bit module in practical sales display
- 1 each of dia. D1 6.0, 8.0, 10.0, 12.0, 16.0 mm
- 5 milling bits type A cylinder (ZYA) without spur cut
- 5 milling bits type A cylinder (ZYAS) with spur cut
- 5 milling bits type C rounded roller (WRC)
- 5 milling bits type G ogival (SPG)
- 5 milling bits type F round arc (RBF)
- 5 milling bits type M pointed cone (SKM)
- 5 milling bits type D spherical (KUD)
Datasheets(X)
For high-alloy, rust-resistant, acid-resistant and heat-resistant steels, cast iron and plastics.
For deburring, edge breaking, plaster and welding seam processing and surface processing.
Number of pieces in assortment/set | 35 PCS |
Surface | Plain |
Last viewed
1/2 inch power extension With 1/2 inch square drive and ball lock
Oil spill cloth
All-round paint spray gun AP HVLP
System case 8.4.3 pattern foam empty range
Protective glove, leather
LED side marker light With angle bracket
Cutting device under table For packaging workstations manufactured from the Würth aluminium profile system WAPS®
Metric combination wrench With POWERDRIV®, 11 pieces
Tapered pin, unhardened DIN 1, plain steel, unhardened, design A (ground)
Cover For bucket