Milling bit assortment/set Ruko 116008TC 35 pieces TiCN
TC milling bit set TiCN 35 pcs. 116008TC Ruko
CTR-RUKO-116008TC-HM-TICN-D6
Register now and access more than 125,000 products
The surface hardness of the tool is increased by the TiCN wear protection coating to approx. 3000 HV/micro-hardness and the heat resistance up to 400°C. This increases service life and productivity.
- 1 each of dia. D1 6.0, 8.0, 10.0, 12.0, 16.0 mm
- 5 milling bits type A cylinder (ZYA) without spur cut
- 5 milling bits type A cylinder (ZYAS) with spur cut
- 5 milling bits type C rounded roller (WRC)
- 5 milling bits type G ogival (SPG)
- 5 milling bits type F round arc (RBF)
- 5 milling bits type M pointed cone (SKM)
- 5 milling bits type D spherical (KUD)
Datasheets(X)
For high-alloy, rust-resistant, acid-resistant and heat-resistant steels, cast iron and plastics.
For deburring, edge breaking, plaster and welding seam processing and surface processing.
Number of pieces in assortment/set | 35 PCS |
Surface | TiCN |
Last viewed
System drawer cabinet 8.6: 574x603 mm
Pressure strip
Small abrasive mop Klingspor KM 613
Threaded fitting DIN 976-1 (shape A) with standard metric ISO thread, zinc-plated steel 4.8, blue passivated
Spyhole, type C With crystalline lens
Nitrilon Plus protective glove
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, plain
L-shaped push-in fitting, long version
Work dungarees Kübler Image Dress 3347 3411
Angle grinder EWS 7-115 Basic