Milling frame system 60 For multiple locks
Milling frame system 60, multiple lock
MILFRMSYS-60-COMBI-REBATE4-9MM
Register now and access more than 125,000 products
- Milling frame for locking parts and angled striking plates mounted on linkages.
- The milling frame makes it easy to mill locking parts, as the positions of the individual cuts are already fixed.
- All grooves are milled to a defined cutting depth.
We recommend applying a test cut prior to the first application. One ∅ 27-mm stop ring and one ∅ 16-mm cutter are used for processing.
Dimensions subject to change. Subject to technical changes!
Datasheets(X)
For rebated wooden house doors with 4-mm rebate space.
Installation tip:
1. Position the milling jig using stop.
2. Clamp the gauge on the door frame.
3. All milling can be carried out with a setting depth of 60 mm.
4. Mill out locking point from above and from the front end.
 | |
Suitable for rebate clearance | 4 mm |
Dimension between axes, multiple lock | 9 mm |
Last viewed
Countersunk screw with hexagon socket head ISO 10642, steel 8.8, zinc-plated, blue passivated (A2K)
Hexagon socket set screw with truncated cone ISO 4026 polyamide 6.6, natural
Slotted nut DIN 546, A2 stainless steel, plain
Hexagon socket set screw with pin ISO 4028, steel, 45H, plain
Hexagonal bolt with thread up to the head ISO 4017, steel 10.9, zinc-plated, blue passivated (A2K)
Pliers holder For square holes in perforated plates, workshop trolleys and the ORSY®1 shelving systems
WÜPLAST® pan head screw with Z Phillips head WN 1412, steel 10.9, zinc-plated, transparent passivated (A3K)
Stretch X trousers
Hexagon Socket Head Cap Screw
Synthetic corundum flap wheels