Mounting plate For VLB 40 hinges
Mounting plate VLB 40
MNTPLT-F.RECESHNG-VLB40-ZP-0
Register now and access more than 125,000 products
- The mounting plate is used for assembly of VLB hinges on wrap-around frames for abutting DIN R and DIN L wooden doors
Installation instructions: Jamb thickness (x) - 4 mm, hinge thickness = offset of the mounting plate.
If a mounting plate of a specific installation height is not listed, select a mounting plate of the next largest installation height. However, the frame must then be underlaid to compensate for the difference.
The fastening screws for the M5 x 13.5 mm nickel-plated TX 20 hinges are supplied with the VLB hinges.
Delivery time approx. 4 weeks for articles 0687380495 and 0687380498.
Specified dimensions not binding. Subject to technical changes.
Datasheets(X)
 | |
Material | Steel |
Crank | 0 mm |
Surface | Zinc plated |
Last viewed
1/4 inch socket wrench, inch, hex., long
3KS Plus profile double cylinder For keyed alike profile cylinders in original equipment
Circlips for shaft, shape A
Twist drill bit HSS DIN 338 type RN 130°
Tapered pin with female thread, unhardened DIN 7978, plain steel, unhardened
FKM 80 Shore O-ring ISO 3601-1
Twist drill bit HSS DIN 338 type RN 118°
ISO 4762 steel 12.9, zinc flake, silver (ZFSHR)
Hot melt adhesive 202
Hexagon nut, high profile