Mounting plate For VLB 40 hinges
Mounting plate VLB 40
MNTPLT-F.RECESHNG-VLB40-ZP-5
Register now and access more than 125,000 products
- The mounting plate is used for assembly of VLB hinges on wrap-around frames for abutting DIN R and DIN L wooden doors
Installation instructions: Jamb thickness (x) - 4 mm, hinge thickness = offset of the mounting plate.
If a mounting plate of a specific installation height is not listed, select a mounting plate of the next largest installation height. However, the frame must then be underlaid to compensate for the difference.
The fastening screws for the M5 x 13.5 mm nickel-plated TX 20 hinges are supplied with the VLB hinges.
Delivery time approx. 4 weeks for articles 0687380495 and 0687380498.
Specified dimensions not binding. Subject to technical changes.
Datasheets(X)
 | |
Material | Steel |
Crank | 5 mm |
Surface | Zinc plated |
Last viewed
FLEXEN® Cold rubber endless pipe insulation
Indicator and brake light bulb H21W
ASSY® 4 A2 CSMP timber screw A2 stainless steel plain partial thread countersunk milling pocket head
W-TEC® INSERT COIL — tang break-off tool
TIME-SERT® screw-in tool
Stirrup handle Plastic
Hexagon socket set screw with truncated cone ISO 4026 A2 stainless steel 21H, plain
Carpenter's pencil
Hexagonal bolt, with thread to head and fine thread DIN 961, steel 8.8, zinc-plated, blue passivated (A2K)
Sliding block WAPS