Mounting screw AS W.TEC® DUCTING CLAMP - Heavy-duty series
DIN 3015-2 phosphated steel W.TEC series
STCKBLT-DIN3015-2-AS-W1-(PHR)-SZ1
W.TEC
Register now and access more than 125,000 products
Datasheets(X)
 | |
Nominal size according to DIN | 1 |
Thread type x nominal diameter (d6) | M10 |
Length (l) | 24 mm |
Length of head (L2) | 26 mm |
Thread length (metric thread) (L3) | 25 mm |
Width across flats (SW) | 15 mm |
DIN | 3015-2 |
Material | Steel |
Surface | Phosphated |
Last viewed
VARIFIX® hammer head fastener standard fix Pre-assembled with nut and washer, zinc-plated
Hexagonal bolt with thread up to the head
Rotatable drop-in anchor For installing plastic windows in the reveal
Double open-end wrench, ultra-thin
Stainless steel base
Round head screw with square neck DIN 603, steel 4.8, zinc-plated, blue passivated (A2K)
Flat washer with chamfer DIN EN ISO 7090, steel, hot-dip galvanised (hdg), hardness class 200 HV
Straight male fitting ISO 8434-1, zinc-nickel-plated steel, BSPP male thread with seal
Hexagon Socket Head Cap Screw with centre, with low head
Die Ruko HSCo DIN EN 22568 metric