Mounting screw DIN 3017-2, type AS, W.TEC series
DIN 3015-2 zinc-plated steel W.TEC series
STCKBLT-DIN3015-2-AS-W1-(DSP)-SZ3
W.TEC
Register now and access more than 125,000 products
Datasheets(X)
 | |
Nominal size according to DIN | 3 |
Thread type x nominal diameter (d6) | M10 |
Length (l) | 50 mm |
Length of head (L2) | 26 mm |
Thread length (metric thread) (L3) | 50 mm |
Width across flats (SW) | 15 mm |
DIN | 3015-2 |
Material | Steel |
Surface | Zinc plated thick-layer passivation |
Last viewed
Flat steel concrete anchor L-profile
STC end mill Speedtwister-Universal, long, optional, five cutting edges, uneven angle of twist gradient, 3xD
GPN 250 pipe protective cap Polyethylene (PE-LD/PE-LLD), yellow
Base height adjuster type EV-S for screwing on With electrical height adjustment using optional cordless pliers
Oval-head screws with H cross recess DIN 7985, steel 8.8, plain
System insert, plastic, 4.4.1
Low-cut safety shoes, S2
Feather key, high profile DIN 6885, steel C 45 K, plain, shape A
Ducting clamp DIN3015-2, heavy-duty series, ribbed inner surface, W.TEC series
Cetus vest