Moveable and lowerable module For standard cabinet workbench
Module mobile and lowerable
MOD-MOB/ADJ-F.CWB-STDD-1500-RAL7035
Register now and access more than 125,000 products
- Stable undercounter construction for flexible use of system cabinet workbenches at different workplaces
- The control lever raises and lowers the cabinet workbench
- Four castors with a diameter of 125 mm and a plastic tread, of which two are swivel castors with locking device and two are fixed castors
- Maximum load for mobile use up to 400 kg
We recommend ordering the module only in conjunction with a cabinet workbench. Subsequent installation is complex.
Datasheets(X)
Width | 1324 mm |
Depth | 632 mm |
Colour | Light grey RAL 7035 |
Design of the rolls | 2 fixed castors without brake (D: 125 mm), 2 swivel castors with brake (D: 125 mm) |
Max. load capacity | 400 kg |
Last viewed
Hexagon head serrated screw with flange W-0274, steel 8.8, zinc-plated, blue passivated (A2K)
Low-cut safety shoes, S1
Bit bars 8 pieces
Round cable passage in two parts
FLEXEN® cold rubber Plus S2 continuous coil pipe insulation
Welder clothing
Replacement seal set For pressure sprayer
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Spacer washer
Socket contact 2.5 Uninsulated with four locking lugs