Moveable and lowerable module For system cabinet workbench
System module mobile and lowerable for cab wrkbnch
CWB-MODUL-MOB-ADJ-2000-RAL7016
Register now and access more than 125,000 products
- Stable undercounter construction for flexible use of system cabinet workbenches at different workplaces
- The control lever raises and lowers the cabinet workbench
- Four castors with a diameter of 125 mm and a plastic tread, of which two are swivel castors with locking device and two are fixed castors
- Maximum load for mobile use up to 400 kg
We recommend ordering the module only in conjunction with a cabinet workbench. Subsequent installation is complex.
Datasheets(X)
Width | 1802 mm |
Depth | 588 mm |
Colour | Anthracite grey RAL 7016 |
Design of the rolls | 2 swivel castors with brake (D: 125 mm) |
Max. load capacity | 400 kg |
Last viewed
New generation of Tipmatic unit for Dynapro soft-close full-extension slide
Anchor plate ASS 65
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, A4-80 stainless steel, plain
EUROFAST® support rails
Protective gloves, knitted Ansell Monysoft® 1
Slotted flat-head screw DIN 85, steel 4.8, zinc-plated, blue passivated (A2K)
WÜPLAST® countersunk head screw with Z Phillips head WN 1413, steel 10.9, zinc-plated, transparent passivated (A3K)
Stud with threaded end ≈ 1 d
Hexagonal bolt with thread up to the head DIN 933, brass, plain
GEFU® thread-rolling screw With Taptite 2000® thread, hexagon head with collar and hexalobular drive (TXplus)