Mud flaps
Mud flap hot-pressed brass with stainless steel strainer
STRAINER-BRS-G1/4
Register now and access more than 125,000 products
- Connecting thread according to DIN ISO 228/1
- CW617N housing material, sandblasted, matt
- PTFE cover seal
- Stainless steel strainer
- Mesh size dia. 0.5 mm
For horizontal and vertical installation
Datasheets(X)
 | |
Thread type x nominal diameter (G) | G1/4 |
Length (L) | 46 mm |
Length 2 (A) | 31 mm |
Width across flats (SW) | 20 mm |
Width across flats 2 (SW1) | 12 mm |
Material | Brass CW617N |
Material of gasket | PTFE |
Min./max. temperature conditions | -10 to 100 °C |
Nominal pressure PN | 16 |
Connection thread | IT 1/4 inch |
DN nominal width | DN 8 |
Thread length (l) | 10 mm |
Last viewed
Safety boots, S3
Dry sandpaper sheet Klingspor PS 33 B
Safety sandal S1
EPS profile thumbturn cylinder for keyed alike systems with original equipment
Bottom bracket latch for insect protection
Winter protective gloves Ejendals TEGERA® 7776
Slotted round head screw W-0231, steel 4.8, zinc-plated, with slot
Pull handle ST/A100
ASSY® 4 WH washer head screw Steel zinc plated partial thread washer head
OBX-3000 KR cover angle For 3D mounting elements