Mud flaps
Mud flap hot-pressed brass with stainless steel strainer
STRAINER-BRS-G2 1/2
Register now and access more than 125,000 products
- Connecting thread according to DIN ISO 228/1
- CW617N housing material, sandblasted, matt
- PTFE cover seal
- Stainless steel strainer
- Mesh size dia. 0.5 mm
For horizontal and vertical installation
Datasheets(X)
 | |
Thread type x nominal diameter (G) | G2-1/2 |
Length (L) | 146 mm |
Length 2 (A) | 107 mm |
Width across flats (SW) | 83 mm |
Width across flats 2 (SW1) | 56 mm |
Material | Brass CW617N |
Material of gasket | PTFE |
Min./max. temperature conditions | -10 to 100 °C |
Nominal pressure PN | 16 |
Connection thread | IT 2 1/2 inch |
DN nominal width | DN 65 |
Thread length (l) | 19 mm |
Last viewed
TX bit
Sweat band Sundström T06-0506
Hexagon Socket Head Cap Screw
Wire end ferrule with plastic sleeve according to DIN 46228 Part 4
Locking nut DIN 7967 hot-dip galvanised steel
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Reserve taper grooved dowel pin ISO 8741 steel plain
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
Half round head safety screw with hexagon socket and pin Similar to ISO 7380-1, A2-070 stainless steel, plain
EPS profile double cylinder