Multi-element with compensator
Multi-element with compens. rope sys. Universal
MULTIELMNT-W.COMPENSATOR-C241
Register now and access more than 125,000 products
- Mounting on end/corner support with DIBt National technical approval or European Technical Assessment (ETA)
- Continuous fall arrester on roofs and on/in buildings for ergonomic work
- Reduced force transmission to the structure through defined plastic deformation of the single anchor points in the event of a fall
- Resistant to corrosion and weathering: made of stainless steel (min. A2)
- For 8 mm thick stainless steel wire rope (V4A)
- Compensator set including screw link, compensator, multi-element for adjusting pretension (0.8 and 1.3 kN), clamping element and fork terminal
Observe the installation instructions and approvals for the fasteners and single anchor point.
- General technical approval Z-14.9-868
- Also certified in accordance with DIN EN 795:2012 Type C (tests for deformation, static and dynamic strength and integrity) and CEN/TS 16415
Datasheets(X)
- Suitable for securing up to a maximum of three persons in conjunction with fall protection PPE
- Installation possible on the roof, overhead and in buildings
- Installation possible on single anchor points with national technical approval, European Technical Assessment (ETA), approval in individual cases, general type approval, project-related type approval (Berlin) and measured rigid surfaces (steel, concrete components)
Length | 600 mm |
Material | Stainless steel A4, 1.4401 |
Colour | Stainless steel coloured |
Last viewed
Measuring coupling MINIMESS 1620 with DKO support
Pipe and fastening clamp Multifix
Cylindrical roller bearing FAG
Hexagon nut, inch
Machine screw tap HSCo green ring through hole DIN 371/376
Hexagon head bolt
Straight weld fitting ISO 8434-1, stainless steel 1.4571
Nature trousers
Hexagon socket screw-in nut with collar DIN 908, steel, plain
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated thick-film passivated (ZSML)