Multi-purpose lubricant MULTI BIO
MULTI BIO multifunctional lubricant
ADHLUB-(MULTI BIO)-400ML
Register now and access more than 125,000 products
Very good adhesive properties on a variety of surfaces
- Resistant to centrifugal forces in the case of rotational movements
- Ideally suited for lubricating vertical lubrication points
- Optimally suited for lubrication in difficult re-lubrication conditions
Good creep properties
Penetrates even the smallest tolerances when sprayed
Addition of special additives
- Corrosion-resistant additive - offers reliable and lasting protection against corrosion
- Wear-protection additive - prevents premature wear.
Biodegradable in line with OECD 302
Splash-proof
Silicone-, resin- and acid-free
Biodegradable in accordance with OECD 302
The above usage instructions are recommendations based on the tests we have conducted and our experience. We advise that you conduct your own tests prior to use. Given the wide variety of different applications and conditions of storage and processing, we cannot guarantee any results arising from specific applications. We accept no legal liability for any recommendation or technical information supplied by our free customer hotline, except where this recommendation and/or technical information forms a component of the contractually agreed service to which we have committed, or where the customer service colleague acted knowingly or intentionally. We guarantee the consistent quality of our products and reserve the right to make technical alterations and improvements.
Datasheets(X)
Suitable for lubricating chains and machine parts, joints, hinges, toothed gears, winches, gear racks, guide rails and much more.
Can be used wherever there is a particular hazard of the ground and surface water being affected by a lubricant.
Shake the can before use. Spray the surface to be treated from a distance of 15-30 cm and leave to evaporate. Clean and degrease severely soiled components first. After use, turn can upside down and spray until valve is clear.
Chemical basis | Synthetic ester oils and native fatty oils |
Colour | Yellowish |
Smell/fragrance | Characteristic |
Density | 0.624 g/cm³ |
Density conditions | at 20°C |
Min. temperature conditions | -20 °C |
Max. temperature conditions | 90 °C |
Kinematic oil basis viscosity | 500 mm²/s |
Conditions for viscosity of oil basis | at 40°C |
Silicone-free | Yes |
Acid-free | Yes |
Resin-free | Yes |
Contents | 400 ml |
Weight of content | 249.4 g |
Shelf life from production | 24 Month |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
Piezo handle with suspension hook and storage studs on the side
Hexagon nut ISO 4032 steel 10, plain
Insect remover
Diamond cutting disc for construction sites
Twist drill bit HSCo DIN 338 type RN oxide
Wave form fixing band with no marginal perforation
Cetus trousers with holster pockets
Threaded rod DIN 976, A2-70 stainless steel, shape A
Compact workshop trolley
Abrasive/sticker wheel Mirka Q Silver