Nail UNS 104 In accordance with DIN EN 206
UNS 104 nail
NL-UNS104-DISC23MM-52MM
Register now and access more than 125,000 products
Length calculation for nails used on concrete surfaces:
Penetration depth (min. 25 mm/max. 40 mm) + thickness of component to be fastened = nail or shank length
All nails are suitable for secondary attachments (without technical approval). The maximum tensile strength of individual attachments are at the discretion of the user and must be determined with test attachments or pull-out tests.
Datasheets(X)
 | |
Material of nail | Steel |
Surface of the nail | Zinc plated |
Material of washer | Steel |
Surface of the washer | Zinc plated |
Washer thickness | 2 mm |
Shaft length (SL) | 52 mm |
Shank diameter (Øds) | 3.7 mm |
Washer diameter (ØS) | 23 mm |
Head diameter (Ødk) | 8 mm |
Suitable for device type | Würth BST 350 |
Last viewed
Slotted cheese head
Set screw hex socket and flat point
Heat-shrink crimp branch connector end connector
Single wire seal (SEAL) For uninsulated cable connector
Hexagonal bolt with thread up to the head
Hexagon Socket Head Cap Screw
Low-cut safety shoes, S3
Cutting disc Klingspor A 646 R Supra
Hexagonal bolt with thread up to the head
Hard hat, accessories