Nail UNS 104 In accordance with DIN EN 206
UNS 104 nail
NL-UNS104-DISC23MM-57MM
Register now and access more than 125,000 products
Length calculation for nails used on concrete surfaces:
Penetration depth (min. 25 mm/max. 40 mm) + thickness of component to be fastened = nail or shank length
All nails are suitable for secondary attachments (without technical approval). The maximum tensile strength of individual attachments are at the discretion of the user and must be determined with test attachments or pull-out tests.
Datasheets(X)
 | |
Material of nail | Steel |
Surface of the nail | Zinc plated |
Material of washer | Steel |
Surface of the washer | Zinc plated |
Washer thickness | 2 mm |
Shaft length (SL) | 57 mm |
Shank diameter (Øds) | 3.7 mm |
Washer diameter (ØS) | 23 mm |
Head diameter (Ødk) | 8 mm |
Suitable for device type | Würth BST 350, Hilti DX 2, Hilti DX A41, Würth BST MA-75 (single shot kit for single fixtures), Hilti DX 350, DX 36M, DX 460, DX 5 |
Last viewed
Injector removal tool set For M9R 2.0 dCi engines
Protective dust plug GPN 920 A
Work trousers
pias® drilling screw with hexagon head and drill tip Case-hardened steel, zinc-plated, blue passivated
Engine flush and cleaner For use in all petrol and diesel engines
Particle filter P3 for half face mask HM 173
Design grating, point Design 2, point, flat/super flat
Hexagonal bolt with shank ISO 4014, A4-50 and A4-70 stainless steel, plain
Twist drill bit, metal Ruko DIN 345 HSCo plain
Work dungarees