Nail anchor SHARK<SUP>® </SUP>Hammer TYPE FK A2 - DWL-(SHARK HAMMER)-FK-PLA-NL-A2-10-6X40

Nail anchor SHARK<SUP>® </SUP>Hammer TYPE FK A2 - DWL-(SHARK HAMMER)-FK-PLA-NL-A2-10-6X40 - 1

Nail anchor SHARK<SUP>® </SUP>Hammer TYPE FK A2 - DWL-(SHARK HAMMER)-FK-PLA-NL-A2-10-6X40 - 2

Nail anchor SHARK<SUP>® </SUP>Hammer TYPE FK A2 - DWL-(SHARK HAMMER)-FK-PLA-NL-A2-10-6X40 - 3

Nail anchor SHARK<SUP>® </SUP>Hammer TYPE FK A2 - DWL-(SHARK HAMMER)-FK-PLA-NL-A2-10-6X40 - 4

Nail anchor SHARK^®Hammer TYPE FK A2

Name: Nail anchor SHARK ® Hammer TYPE FK A2
Brand: Würth
SKU: 590634640

SHARK HAMMER nail anchor A2 flat collar type FK
DWL-(SHARK HAMMER)-FK-PLA-NL-A2-10-6X40
ZEBRA-SHARK

Art.-no. 590634640

EAN 4061975320339

All versions

Similar products

Prices for customers after login

Nail anchor SHARK^®Hammer TYPE FK A2

Art.-no. 590634640

Prices for customers after login

Quantity

x 100 pcs

Exclusively for trade customers

Login/Register
Call customer service:

With fast assembly and proven performance, this product offers an all-round solution for fastening light loads using push-through installation. Wall plug body with flat collar nail made from A2 stainless steel

Quick, cost-effective installation

Can be removed via drive in screw head

Pre-assembled with matching screw

Suitable for in-place installation

Defined integrated hammer-in stop prevents premature expansion

For countersunk and protruding finish

Rot-resistant (plastic anchor made of high-quality polyamide)

Resistant to UV rays

Halogen-free

Application area

C-profile rails in dry walling

Cable ducts

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Application area

Can be used in concrete and masonry

For any light-load fittings in interior finishing as well as wood, metal, plumbing and electrical applications, e.g. securing angle brackets, panels, metal sheets, cable ducts and any components for non-recessed installation

Anchor diameter	6 mm
Anchor length (l)	40 mm
Max. attachment height (t fix)	10 mm
Embedding depth (h nom)	30 mm
Nominal drill-bit diameter (d 0)	6 mm
Drill hole depth (h 1)	35 mm
Hole diameter in component (d f)	6.5 mm
Material of nail	Stainless steel A2
Surface	Plain
Tightening torque (T inst)	6 Nm
Internal drive	Z2

Recommended loads	Concrete C20/25	F_rec [kN]	0,2	0,3	0,35
	Sand-lime brick KS 12		0,2	0,3	0,35
	Hollow sand-lime brick KSL 12		0,1	0,12	0,13

Embedment depth	hnom ≥ [mm]	25	30	40
Thread dia. (THREAD type only)	dthr. [mm]	-	6	-
Thread length (THREAD type only)	Ithr. [mm]	-	6	-
Nominal drill diameter	d0 [mm]	5	6	8
Hole diameter in component	df [mm]	5	6	8