Nail anchor SHARK® Hammer TYPE SK A2
SHARK HAMMER nail anch. A2 cntrsnk cl type SK
DWL-(SHARK HAMMER)-SK-PLA-A2-30-6X60
ZEBRA
Register now and access more than 125,000 products
- Quick, cost-effective installation
- Can be removed via drive in screw head
- Pre-assembled with matching screw
- Suitable for push-through installation
- Defined integrated hammer-in stop prevents premature expansion
- For countersinking and leaving protruding
- Resistant to UV rays
- Rot-resistant (plastic anchor made of high-quality polyamide)
- Halogen-free
Datasheets(X)
- Can be used in concrete and masonry
- For any light-load fittings in interior finishing as well as wood, metal, sanitary, and electrical applications, e.g. securing squared timber, laths, thin metal sheets and all components for recessed installation
Anchor diameter | 6 mm |
Anchor length (l) | 60 mm |
Max. attachment height (t fix) | 30 mm |
Embedding depth (h nom) | 30 mm |
Nominal drill-bit diameter (d 0) | 6 mm |
Drill hole depth (h 1) | 35 mm |
Hole diameter in component (d f) | 6.5 mm |
Material of nail | Stainless steel A2 |
Surface | Plain |
Internal drive | Z2 |
Last viewed
Work jacket Fristads Green 4688 GRT
Machine screw tap, combined Ruko bit "short" HSS plain
Hexagon nut, inch
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 8.8, plain
GEFU® thread-rolling screw With Taptite 2000® thread, flat cylinder head and hexalobular drive
Three prong knob with insert nut Full hub
Twist drill bit HSCo DIN 340 type RN OXIDE
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, plain
Multi-Tester Pro II LCD two-pin voltage tester
Half-length taper grooved pin ISO 8745 A1 stainless steel plain