Nail with plate UNKT 130
Nail with disk UNKT 130
NL-UNKT130-PLT36MM-42MM
Register now and access more than 125,000 products
- For insulating materials up to approx. 20 mm thick, e.g. bubble film, fleece film
- With nail type HN 101
Length calculation for nails used on concrete surfaces:
Penetration depth (min. 25 mm/max. 40 mm) + thickness of component to be fastened = nail or shank length
All nails are suitable for secondary attachments (without technical approval). The maximum tensile forces of individual attachments are at the discretion of the user and must be determined with test attachments or pull-out tests.
 | |
Material | Steel |
Surface of the nail | Zinc plated |
Shaft length (SL) | 42 mm |
Head diameter (Ødk) | 8 mm |
Shank diameter (Øds) | 3.7 mm |
Material of disc | PP - Polypropylene |
Disc diameter (ØT) | 36 mm |
Suitable for device type | Würth BST 350, Hilti DX 2, Würth BST MA-75 (single shot kit for single fixtures), Hilti DX 350, DX 36M, DX 460, DX 5 |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Round head screw with square neck DIN 603, steel 4.8, zinc-plated, blue passivated (A2K)
Stretch X shorts
Work poloshirt
Hexagonal bolt with shank DIN 931, A4-70 stainless steel, plain
Cetus trousers with holster pockets
Hexagon nut with trapezoidal thread
Slide hammer 9kg no recoil
Threaded rod
Safety boots, S3
