Nail with plate UNKT 160
Nail with disk UNKT 160
NL-UNKT160-PLT66MM-32MM
Register now and access more than 125,000 products
- For insulating materials up to approx. 20 mm thick, e.g. bubble film, fleece film
- With nail type HN 101
Length calculation for nails used on concrete surfaces:
Penetration depth (min. 25 mm/max. 40 mm) + thickness of component to be fastened = nail or shank length
All nails are suitable for secondary attachments (without technical approval). The maximum tensile forces of individual attachments are at the discretion of the user and must be determined with test attachments or pull-out tests.
 | |
Material | Steel |
Surface of the nail | Zinc plated |
Shaft length (SL) | 32 mm |
Head diameter (Ødk) | 8 mm |
Shank diameter (Øds) | 3.7 mm |
Material of disc | PP - Polypropylene |
Disc diameter (ØT) | 66 mm |
Suitable for device type | Würth BST 350, Hilti DX 2, Würth BST MA-75 (single shot kit for single fixtures), Hilti DX 350, DX 36M, DX 460, DX 5 |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Polo shirt, long-sleeved SOL'S L549
Safety shoe S1
Sanding disc, hook-and-loop fabric VSM XK870K
Premium ink marker
Timing tool set 4 pieces, for VW Group 1.2, three cylinders, petrol
System bolt With expanding socket for system connector SV 20 E
Adhesive lubricant HHS® 5000
EPS profile double cylinder
Raised countersunk head screw with Z recessed head DIN 966, steel 4.8, zinc-plated, blue passivated (A2K)
Safety boots, S3
