Non-slip fold masker
Cover film, ZEBRA non-slip fold masker
COVFLM-ADHSTR-ANTISLIDE-160CMX15M
ZEBRA
Register now and access more than 125,000 products
Thick anti-slip film
- Traversable
- Provides added safety during use
UV-resistant
Can be removed residue-free within up to three weeks
- Bonding also possible on slightly soiled or slightly structured surfaces
- Long-term fabric adhesive with thick natural rubber adhesive
- Good water and solvent resistance
- Adhesive edge not suitable for use on glass, e.g. tinted glass/self-tint glass).
- Certain plastic surfaces (certain types of PVC) and cellulose nitrate varnishes and precious metals may cause residues. In these cases a test application for 48 hours is recommended. Not suitable for porous or absorbent surfaces, e.g. porous natural stone, marble, granite, concrete and untreated wood. Discolouration may occur on these surfaces.
The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications as well as storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by the provision of this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products.
Datasheets(X)
The time-saving and compact 2-in-1 system for temporary protection of carpets, parquet, tiles etc.
Substrate must be dry and free from grease and dust.
Unroll, affix the tape, cut, unfold the film
Adhesive tape backing material | PE-coated fabric |
Foil backing material | Polyethylene |
Adhesive base | Natural rubber |
Colour | Blue (base material), Green (film material) |
Width (opened out) | 160 cm |
Length of roll | 15 m |
Thickness of adhesive tape | 0.31 mm |
Foil thickness | 0.05 mm |
Adhesive force on steel (per unit of length) | 9.5 N/mm |
Elongation at break | 10 % |
Min. processing temperature | 5 °C |
Max. processing temperature | 40 °C |
Min./max. processing temperature | 5 to 40 °C |
Min. temperature resistance | -10 °C |
Moisture resistance | Yes |
Max. temperature resistance | 50 °C |
Ultraviolet resistance | Yes |
Max. usage duration | 3 Weeks |
Shelf life from production | 12 Month |
Conditions to maintain shelf life from production | at 20°C and 50% humidity |
Last viewed
Nozzle For combination blind rivet tools
Feather key, high profile DIN 6885, steel C 45 K, plain, shape A
Hexagonal bolt with thread up to the head
Double cylinder S5 locking system
PinPuller® copper electrode
RW® bit
Divider assortment With system boxes for system dimensions 12.6
Protective sleeve
Floor pad
AL 20 short plate pair