Non-woven Quick Change Disc Klingspor QMC 400
Non-woven abrasive disc Klingspor QMC 400
DISCFLC-KLINGSPOR-295393-D50-G240
Register now and access more than 125,000 products
Advantages: Suitable for finishing work on surfaces - cleaning work on metals and varnishes
To perform cleaning work on varnish and other materials, the disc must be placed on a backing pad. In the case of the Quick Change Disc with plastic closure, this is done by screwing it in place with an internal metal pin. The QCA 555 adapter can be used to enable use with any commercially available angle grinder. This allows the sanding discs to be changed quickly and work to be performed much more efficiently.
Datasheets(X)
Diameter (Ø) | 50 mm |
Colour | Claret |
Grid size | 240 |
Last viewed
Work dungarees
T-piece, reduced with solder connection EN1254, copper, 5130R
O-ring, metric
Castellated nut, low profile with fine thread DIN 937, steel 5, plain
Hexagonal bolt
Eye bolt with full thread DIN 444, A2 stainless steel, plain, shape LB
SNAP marker
Mechanic's glove, special
Hexagonal bolt with shank and fine thread DIN 960, steel 8.8, plain
Shim ring DIN 988, steel, plain