Non-woven Quick Change Disc Klingspor QMC 400
Non-woven abrasive disc Klingspor QMC 400
DISCFLC-KLINGSPOR-295394-D50-G320
Register now and access more than 125,000 products
Advantages: Suitable for finishing work on surfaces - cleaning work on metals and varnishes
To perform cleaning work on varnish and other materials, the disc must be placed on a backing pad. In the case of the Quick Change Disc with plastic closure, this is done by screwing it in place with an internal metal pin. The QCA 555 adapter can be used to enable use with any commercially available angle grinder. This allows the sanding discs to be changed quickly and work to be performed much more efficiently.
Datasheets(X)
Diameter (Ø) | 50 mm |
Colour | Claret |
Grid size | 320 |
Last viewed
Shoulder screw with thread and slot
Softflex W-130 Level B cut-resistant glove
Flat connector contact MCP 2.8
Sundström labelling system R09-0101
Perforated single guide rail For redoslide M15-HE and M15-HC furniture sliding door fitting
Work jacket
Hexagon Socket Head Cap Screw with metric fine pitch thread ISO 12474/DIN 912, steel 8.8, plain
Sweatshirt
Work dungarees
HPC Speedcut 4.0 Universal end mill, extra long XL, optional, four blades, uneven angle of twist gradient, HA shank