Non-woven sanding belt For RED PERFECT® 3D tube belt sander
Fleece sand. belt tube belt sander RED PERFECT 3D
SNDBL-FLC-MEDIUM-30X610MM
RED PERFECT
Art.-no.
0673603180
EAN 4065746436342
Prices for customers after login
Exclusively for trade customers
Register now and access more than 125,000 products
For matting, burnishing and finishing (final grinding) as well as for levelling of stainless steel handrails with strict requirements for decorative surfaces.
- Perfect final sanding (finish sanding) suitable for high surface requirements with significantly lower roughness depth, without producing a high-gloss finish.
- Very long service life and even distribution of the abrasive grain guarantee a consistent sanding finish on the workpiece
- Reinforced nylon sanding fleece with three-dimensional non-woven structure
- The flexible and elastic structure of the fleece ensures optimal adaptation to the workpiece. No change to the geometry of the workpiece.
- Significant reduction in reworking
Notice
- At high rotation speeds, a coarse grain acts like a finer grain and at low rotation speeds, a fine grain acts like a coarser grain.
- Use tools with a low contact pressure; high contact pressure leads to premature wear.
- With insufficient chip removal, do not increase the contact pressure, but instead use a coarser grain.
- Enhanced process reliability Whether you are working with an electric sanding file, tube belt sander, stationary contact grinding machine or angle grinder, a consistent surface quality is guaranteed.
Product information
Datasheets(X)
Application area
- For finishing, matting, burnishing and cross-fading with very low roughness depth
- Removing discolouration, paint layers, surface rust, repairing surfaces with minor damage and fine matting
- Materials to be processed: Steel, stainless steel, aluminium, brass and copper
Width x length | 30 mm x 610 mm |
Design | Medium |
Colour | Red brown |
Grid size | 180 |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
End cap For aluminium recessed handle, L shape, closed, horizontal
Work shoe
Low-cut safety shoes, S1P
Rotary shaft sealing ring DIN 3760, plastic NBR, shape A
Twist drill bit HSCo DIN 338 type RN bronze point thinning
Safety boots, S2
Sealed grommet TPE
Safety sandals, S1
Half-shell pin crimping insert
Cetus work dungarees