Nut for T slots
DIN 508 steel zinc plated
NUT-DIN508-8-(A2K)-M4X5
Register now and access more than 125,000 products
Datasheets(X)
 | |
Thread type x nominal diameter (G) | M4 |
Suitable for groove width (a) | 5 mm |
Width (e) | 9 mm |
Flange thickness (k) | 3 mm |
Height (H1) | 6.5 mm |
DIN | 508 |
Material | Steel |
Surface | Zinc plated |
Vickers hardness, HV | 170 HV |
Last viewed
Divider assortment Divider assortment with compartment rails and compartment dividers for system dimensions 8.8
Hexagonal bolt, with thread to head and fine thread DIN 961, steel 10.9, plain
E90 fire protection duct
ASSY®plus 4 CSMP SPECIAL universal screw Hardened zinc-plated steel partial thread countersunk head
Safety shoe S1
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
STARLINE® work vest
Knurled nuts, low type DIN 467, brass, nickel-plated
Hexagonal bolt with shank and fine thread DIN 960, steel 10.9, plain
Coloured rubber grommets made from polychloroprene rubber Insulating grommets, coloured, CR