OBS 6 single-joint hinge
Single-joint hinge OBS 6 clip mounting
HNGE-OBS6-CRNBLCK-ZD-(NI)-3/0MM
GRASS
OBS6
Register now and access more than 125,000 products
2D adjustment
- Easy adjustment of furniture doors
- Lateral adjustment: -2 mm using eccentric fitting
- Height adjustment: +/- 2 mm via slotted hole. To adjust the height, break off the two pins under the Euro screw (type B, head diameter 9.0 mm)
Order one hinge cup for all OBS 6 and OBS 8 hinge models separately
- Cup edge cover
- Suitable for corner stop or twin stop
Opening angle of 180°/230°/270°
Specified dimensions not binding. Subject to technical changes!
Datasheets(X)
Suitable for primary structure and continuous construction
 | |
Door position | Inset |
Joint width | 3 mm |
Door overlay | 0 mm |
Opening angle | 180 Degree |
Type of assembly | Screw-on |
Drill hole diameter | 35 mm |
Material | Die-cast zinc |
Surface | Nickel plated |
Last viewed
Castellated nut, low profile DIN 937, steel 17H/22H, zinc-plated, blue passivated (A2K)
Flange cover GPN 670 Polyethylene (PE-LLD), yellow
Mud flap for rear apron
Work jacket Daiber JN893 ladies' workwear sweat jacket - SOLID
Cylindrical pin, hardened DIN 6325, steel, plain
Screw with flattened half round head and hexagon socket ISO 7380-1 A4-070 stainless steel, plain
Socket contact 2.5 Uninsulated with four locking lugs
3KS Plus profile double cylinder For keyed alike profile cylinders in original equipment
Eye bolt with full thread DIN 444, A2 stainless steel, plain, shape LB
Fitting Brass, 10010