OBS 6 single-joint hinge
Single-joint hinge OBS 6 clip mounting
HNGE-OBS6-CRNBLCK-ZD-(NI)-3/13MM
GRASS
OBS6
Register now and access more than 125,000 products
2D adjustment
- Easy adjustment of furniture doors
- Lateral adjustment: -2 mm using eccentric fitting
- Height adjustment: +/- 2 mm via slotted hole. To adjust the height, break off the two pins under the Euro screw (type B, head diameter 9.0 mm)
Order one hinge cup for all OBS 6 and OBS 8 hinge models separately
- Cup edge cover
- Suitable for corner stop or twin stop
Opening angle of 180°/230°/270°
Specified dimensions not binding. Subject to technical changes!
Datasheets(X)
Suitable for primary structure and continuous construction
 | |
Door position | Corner |
Joint width | 3 mm |
Door overlay | 13 mm |
Opening angle | 270 Degree |
Type of assembly | Screw-on |
Drill hole diameter | 35 mm |
Material | Die-cast zinc |
Surface | Nickel plated |
Last viewed
Cylindrical pin, hardened DIN 6325, steel, plain
Cylindrical pin, hardened DIN 6325, steel, plain
Washer For screws with a heavy clamping sleeve, DIN 7349, zinc-plated steel, blue passivated
Threaded fitting
Hexagon Socket Head Cap Screw full thread ISO 4762/DIN 912, steel 12.9, plain, with full thread
Safety shoe S1P
Low-cut safety shoes, S2
Graffiti remover
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
Hexagonal bolt with shank ISO 4014, A4-50 and A4-70 stainless steel, plain