Offset steel door split spindle 10 mm with M12 threaded roller
Steel door spindle with threaded roller
AY-CHPIN-DRFRN-THR12-ST-(ZN)-10/8X100
Register now and access more than 125,000 products
- These steel door spindles can be used to install a door handle with an 8 mm square on a house door
- Due to different door thicknesses and penetration depths in the door handles, these spindles are required in different lengths
Please note that the fastening screws for the metal fittings must also be changed when using shorter or longer steel door spindles.
Specified dimensions not binding. Subject to technical changes!
Datasheets(X)
For house doors.
Screwing in the grub screw expands the spindle in the handle.
 | |
Suitable for min./max. door thickness | 70-75 mm |
Material | Steel |
Surface | Zinc plated |
DIN direction | DIN R/L |
Square size | 10 mm/8 mm |
Length (L) | 100 mm |
Last viewed
Wedge lock washer, W.TEC series, wide shape
Sanding belt, fabric VSM XK870X
Work coat
Position screw for ISO S clamping system
Combination pliers DIN ISO 5746
WÜPOFAST® zinc-plated blue chipboard screw
Adjusting ring and threaded pin DIN 705, shape A and DIN 553 set screw, A1 stainless steel
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated thick-film passivated (ZSML)
Solid carbide single-tooth cutter, plastic, right-hand cutting with left twist
Long sanding belt metal CERALINE