Offset steel door split spindle 10 mm with M12 threaded roller
Change pin with threaded roller
CHPIN-F.DRFRN-THR12-ST-(ZN)-10/8X100
Register now and access more than 125,000 products
- These steel door spindles can be used to install a door handle with an 8 mm square on a house door
- Due to different door thicknesses and penetration depths in the door handles, these spindles are required in different lengths
Please note that the fastening screws for the metal fittings must also be changed when using shorter or longer steel door spindles.
Specified dimensions not binding. Subject to technical changes!
Datasheets(X)
For house doors.
Screwing in the grub screw expands the spindle in the handle.
 | |
Suitable for min./max. door thickness | 70-75 mm |
Material | Steel |
Surface | Zinc plated |
DIN direction | DIN R/L |
Square size | 10 mm/8 mm |
Length (L) | 100 mm |
Last viewed
Hammer drill bit Max Quadro-L Vario
S1 safety shoes Uvex1 Sport white 6583
Slotted cheese head
Article sticker
Stud with threaded end ≈ 1.25 d DIN 939, steel 10.9, zinc-plated, blue passivated (A2K)
Saddle washer for trapezoidal profile
Twist drill SC, WN 20, type N, internal cooling, TiAlN-UV
Safety boots, S2
Spare loop For tyre tags
Hexagon nut, low profile, with clamping piece (non-metal insert) DIN 985, brass, nickel-plated