Offset steel door split spindle 10 mm with M12 threaded roller
Change pin with threaded roller
CHPIN-F.DRFRN-THR12-ST-(ZN)-10/8X105
Register now and access more than 125,000 products
- These steel door spindles can be used to install a door handle with an 8 mm square on a house door
- Due to different door thicknesses and penetration depths in the door handles, these spindles are required in different lengths
Please note that the fastening screws for the metal fittings must also be changed when using shorter or longer steel door spindles.
Specified dimensions not binding. Subject to technical changes!
Datasheets(X)
For house doors.
Screwing in the grub screw expands the spindle in the handle.
 | |
Suitable for min./max. door thickness | 75-80 mm |
Material | Steel |
Surface | Zinc plated |
DIN direction | DIN R/L |
Square size | 10 mm/8 mm |
Length (L) | 105 mm |
Last viewed
Countersunk head screw with recessed head, H DIN 965, steel 4.8, zinc-plated, blue passivated (A2K)
Clamping pin/clamping sleeve
Contact tip MB 15 AK MB 15 AK For welding torch MB 15 AK
Low-cut safety shoes, S3
STARLINE® Plus trousers
Safety boots, S3
REFILLO®mat filling can
Shelf set to Cornerstone Maxx
ASME B18.5 steel GR5 zinc plated yellow
Countersunk screw with hexalobular head