Offset steel door split spindle 10 mm with M12 threaded roller
Change pin with threaded roller
CHPIN-F.DRFRN-THR12-ST-(ZN)-10/8X85MM
Register now and access more than 125,000 products
- These steel door spindles can be used to install a door handle with an 8 mm square on a house door
- Due to different door thicknesses and penetration depths in the door handles, these spindles are required in different lengths
Please note that the fastening screws for the metal fittings must also be changed when using shorter or longer steel door spindles.
Specified dimensions not binding. Subject to technical changes!
For house doors.
Screwing in the grub screw expands the spindle in the handle.
 | |
Suitable for min./max. door thickness | 55-60 mm |
Material | Steel |
Surface | Zinc plated |
DIN direction | DIN R/L |
Square size | 10 mm/8 mm |
Length (L) | 85 mm |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
HSCo Multi Performance machine tap for blind holes DIN 371/376
Paint spray, silk gloss
Split pin ISO 1234 A2 stainless steel
FKM 80 Shore O-ring ISO 3601-1
Hook For square holes in perforated plates, workshop trolleys and the ORSY®1 shelving systems
Wood screw, DIN 96 A2 Half moon head with slot
Hexagonal bolt with shank ISO 4014, steel 10.9, plain
Threaded pipe fitting EN1254, brass, 3599C
Sharpening stone For diamond cutting discs, cup wheels and core drill bits (excl. PCD)
Ducting clamp Part 3 – Double series
