Offset steel door split spindle 10 mm with M12 threaded roller
Change pin with threaded roller
CHPIN-F.DRFRN-THR12-ST-(ZN)-10/8X90MM
Register now and access more than 125,000 products
- These steel door spindles can be used to install a door handle with an 8 mm square on a house door
- Due to different door thicknesses and penetration depths in the door handles, these spindles are required in different lengths
Please note that the fastening screws for the metal fittings must also be changed when using shorter or longer steel door spindles.
Specified dimensions not binding. Subject to technical changes!
Datasheets(X)
For house doors.
Screwing in the grub screw expands the spindle in the handle.
 | |
Suitable for min./max. door thickness | 60-65 mm |
Material | Steel |
Surface | Zinc plated |
DIN direction | DIN R/L |
Square size | 10 mm/8 mm |
Length (L) | 90 mm |
Last viewed
Full-vision goggles FS 2020-01
Gas filter SR 518 A2 Sundström H02-7012
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 12.9, plain
Countersunk head screw with recessed head, H DIN 965, steel 8.8, zinc-plated, blue passivated (A2K)
1/2" socket wrench insert For TX screws, short
Wing bolt, round wings DIN 316, malleable iron, zinc-plated, blue passivated (A2K)
Lock plate with tabs
Blind bucket rivet, flat head
Split pin ISO/WN 1234 steel zinc-plated
Hexagonal bolt with thread up to the head