Offset steel door split spindle 10 mm with M12 threaded roller
Change pin with threaded roller
CHPIN-F.DRFRN-THR12-ST-(ZN)-10/8X95MM
Register now and access more than 125,000 products
- These steel door spindles can be used to install a door handle with an 8 mm square on a house door
- Due to different door thicknesses and penetration depths in the door handles, these spindles are required in different lengths
Please note that the fastening screws for the metal fittings must also be changed when using shorter or longer steel door spindles.
Specified dimensions not binding. Subject to technical changes!
Datasheets(X)
For house doors.
Screwing in the grub screw expands the spindle in the handle.
 | |
Suitable for min./max. door thickness | 65-70 mm |
Material | Steel |
Surface | Zinc plated |
DIN direction | DIN R/L |
Square size | 10 mm/8 mm |
Length (L) | 95 mm |
Last viewed
Hexagon nut, low profile inch
Sealing plug W.TEC® COVER CAP WP 300 F Polyethylene, natural
Hexagonal bolt with shank
Hexagonal bolt with thread up to the head DIN 933, A4 80 stainless steel, plain
Belleville washer
Shoe accessories
Fixed castor
Slotted cylinder head screw ISO 1207, steel 4.8, zinc-plated thick-film passivated (ZSML)
High-visibil. softshell jacket neon logo Honeywell
Work dungarees