Orbital sander, pneumatic Mirka OS 343CV
Pneumatic orbital sander OS 343CV Mirka
ORBITALSNDR-MIRKA-8991600111-OS-343CV
Register now and access more than 125,000 products
The Mirka® OS 343CV is a very light and ergonomic orbital sander for small or hard-to-reach areas. With its 3.0 mm stroke, the MIRKA® OS 343CV creates the perfect finish. Use with Abranet is particularly recommended.
Datasheets(X)
Sanding stroke | 3 |
Max. idle speed | 10000 rpm |
Air consumption | 453 l/min |
Operating pressure | 6.2 bar |
Last viewed
Sealing grommet EPDM
GEFU® thread-rolling screw With Taptite 2000® thread, countersunk head with hexalobular drive
Multi-purpose drill bit MFD-S Plus
Head lashing system For inner roof supports
Machinist's hammer German design in accordance with DIN 1041
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 12.9, plain
Cylindrical pin, unhardened with oval points DIN 7, plain steel (9 SMnPb 28 k or St 50 K), unhardened, tolerance class m6
Twist drill bit HSCo DIN 1869 R3 type RN
High-visibility work dungarees
Hexalobular-type cheese head screw, low head