Welcome to Würth Aerospace Solutions For trade customers only

PE backfill sealant

PE Sealing cord Material
SEALCORDMATL-PE-PE-30MM

Art.-no. 0875830100
EAN 4011231802178
Prices for customers after login
PE backfill sealant

Art.-no. 0875830100

Prices for customers after login
Quantity
PU
x 25 m

Exclusively for trade customers

Register now and access more than 125,000 products

Silicone-free and good joint filling strength

Complies with DIN 18540


As specified in the German DIN standard, comprises closed-cell, rot-resistant, non-absorbent polyethylene



Prevents three-edge adhesion


Reduces risk of cracking on sealing and expansion joints



Dispenser carton


With the ∅ 6–30 mm, the tape can be conveniently removed through a pre-punched carton opening



Wide range of applications


Universal use for plumbing, concrete and window connection joints

Notice

∅ 6–30 mm are available as roll goods, ∅40 mm and 50 mm as bar goods, each 1 m in length

The usage instructions are recommendations based on the tests we have conducted and based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Datasheets(X)

Certificates/ Documents

 | 

 | 

Chemical basis

Polyethylene

Colour

Grey

Diameter (Ø)

30 mm

Length

25 m

Moulded density

30 kg/m³

Conditions for moulded density

in accordance with DIN 53420

Compression force deflection

40 N/mm²

Compression force deflection conditions

in accordance with DIN 53577, 40% longitudinal compression

Min. breaking elongation

15 %

Breaking elongation conditions

in accordance with DIN 53571

Min. tensile strength

200 kPa

Max. tensile strength

300 kPa

Conditions for tensile strength

in accordance with DIN 53571

Min. temperature resistance

-40 °C

Max. temperature resistance

60 °C

CFC (fuel gas) free

Yes

Silicone-free

Yes

DIN

18540

Building material class

B3 - Of high flammability

Building material class conditions

in accordance with DIN 4102

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information