Welcome to Würth Aerospace Solutions For trade customers only

PERFECT car shampoo

Car shampoo PERFECT
CLNR-CAR-SHAMPOO-PERFECT-1LTR

Art.-no. 0890700005
EAN 4065746398435

Prices for customers after login
PERFECT car shampoo

Art.-no. 0890700005

Prices for customers after login
Quantity
PU

Exclusively for trade customers

Register now and access more than 125,000 products

Dissolves stubborn dirt and enables vehicle washing to be gentle on the paint
  • The heavily foaming cleaning foam can be used for pre-cleaning as a snow foam in a foam gun or a foam sprayer and as a shampoo for manual vehicle washing

  • The special active substance formula dissolves the dirt excellently and leaves a beautiful shine

  • pH-neutral

  • Stable, homogeneous foam

  • Excellent gliding properties
Notice

Do not apply to hot surfaces or allow to dry. Protect from frost. Clean coarse dirt from heavily soiled vehicles beforehand with a high-pressure device.

The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting with deliberate intent. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products. Please observe the technical data sheet!

Product information

Datasheets(X)

Safety data sheet

Certificates/ Documents

 | 

 | 

Application area

Suitable as a shampoo, insect remover and rim cleaner. For optimal pre- and main washing of motor vehicles, bicycles, motorcycles etc. Also offers optimal material compatibility for foil-glued surfaces.

Instructions

Use on high-pressure devices with foam lance: Depending on the type of foam desired (dry/wet), predilute 1:10-1:20 with water. Fine-tune the dosage according to the desired foam structure. Use with foam lance: Mix 15-25 ml of product per 1 l of water. Lather the vehicle from bottom to top and then rub with a sponge. Rinse thoroughly with clean water. Handwash: Lather 50-80 ml in 10 l of warm water. Wash vehicle with sponge. Rinse thoroughly with clean water.

Contents

1 l

Product weight (per item)

1124.500 g

Container

Bottle

Chemical basis

Water tenside

Colour

Brown, transparent

Density/conditions

1.045 g/cm³ / at 20°C

Mixing ratio

01:10 - 01:20

Min./max. processing temperature

30 to 5 °C

Shelf life from production/conditions

60 Month / at 20°C

AOX-free

Yes

Silicone-free

Yes

Phosphate-free

Yes

Bio-degradable

Yes

Required accessory:
 
Product
Description
Quantity
PU
Price
/PU
Foam gun

FMGUN-2,1LTR-1/4IN

For use with Würth utility vehicle cleaners, workshop cleaners and service cleaners and other cleaners together with high-pressure devices or steam jets
x 1 pcs
Perfect Foam pressure sprayer

PMPSPRBTL-FOAM-1500ML

Ideal for applying cleaning foam for vehicle and commercial car cleaning
x 1 pcs
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information