PERFECT leather cleaner
Leather cleaner PERFECT
LEATHCLNR-PERFECT-1LTR
Register now and access more than 125,000 products
- Highly effective foam cleaner for leather and synthetic leather
- Stubborn dirt and specks are removed, so that the leather colour returns to its original colour
- The deep-pore cleaning allows PERFECT's high-quality leather care components to penetrate deep into the leather - for long-lasting protection
Not suitable for aniline leather or suede. Before use (especially for leather steering wheels), test for colour fastness and abrasion resistance of the leather in a small, unobtrusive area. Do not apply to heated surface or allow to dry. Protect from frost.
The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting with deliberate intent. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products. Please observe the technical data sheet!
Suitable for leather and synthetic leather for vehicle interiors, leather furniture, leather clothing etc.
Vacuum off loose dirt. Spray the cleaner on a textile and leather brush or sponge and then massage into the leather. Then wipe thoroughly with a damp microfibre cloth. After cleaning, we recommend that you use PERFECT leather care to protect, care for and seal the leather.
Contents | 1 l |
Colour | Light yellow transparent |
Chemical basis | Aqueous mixture |
Density/conditions | 1.005 g/cm³ / at 20°C |
Shelf life from production | 5 Years |
Bio-degradable | Yes |
AOX-free | Yes |
Silicone-free | Yes |
pH value | 9 |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
Solid carbide end mill Speedcut, ultra-hard steel 68 HRC, corner radius long, optional
Metal core drill bit Ruko solid carbide Tecrona thread holder
Akura 44 profile half cylinder for keyed alike systems with original equipment
Safety boots, S3
High-performance anchor with stud bolts W-HAZ-B/A4
O-ring, imperial NBR 70
Slotted raised countersunk head screw DIN 964, steel 4.8, plain
Hexalobular-type cheese head screw, low head
Rounding milling cutter for wood With ball bearing
Slotted flat-head screw DIN 85, steel 4.8, zinc-plated, blue passivated (A2K)
