Welcome to Würth Aerospace Solutions For trade customers only

PERFECT surface rust remover

Surface rust remover PERFECT
RUSTFLMREM-PERFECT-5LTR

Art.-no. 0890700004
EAN 4065746397254

Prices for customers after login
PERFECT surface rust remover

Art.-no. 0890700004

Prices for customers after login
Quantity
PU
x 1 pcs

Exclusively for trade customers

Register now and access more than 125,000 products

Removes surface rust, brake dust and rust stains effortlessly and gently
  • Acid-free, pH-neutral cleaner for removing surface rust and industrial dust from all painted surfaces

  • Because the surface rust remover is pH neutral, acid-sensitive materials are not damaged

  • Dissolving dirt can be seen thanks to the purple colour reaction
Notice

Do not apply to hot surfaces and do not allow to dry. Protect from frost.

The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting with deliberate intent. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products. Please observe the technical data sheet!

Product information

Datasheets(X)

Safety data sheet

Certificates/ Documents

 | 

 | 

Application area

Suitable for painted surfaces, plastic, chrome, aluminium, glass, glazing, steel/aluminium wheels and vehicle wrapping.

Instructions

Spray undiluted product fully onto the surfaces to be treated. Depending on the level of soiling, allow 3-5 minutes for the product to take effect, which is indicated by a violet colouration. Then rinse thoroughly with clean water or carry out a vehicle wash. In the case of stubborn residues, repeat the treatment and rub with a sponge if necessary.

Contents

5 l

Colour

Colourless

Chemical basis

Water tenside

Shelf life from production

5 Years

Min. application time

2 min

Max. application time

2 min

pH value

7.5

Conditions for pH value

at 20°C

Density

1.115 g/cm³

Density conditions

at 20°C

Silicone-free

Yes

AOX-free

Yes

Additional accessory:
 
Product
Description
Quantity
PU
Price
/PU
Pump spray bottle, acid-resistant

PMPSPRBTL-PP-FKM-ACIDS-1000ML

For simple processing of acidic products from canisters and drums. Highly suitable for aqueous, acidic cleaners with a pH of 0.5 - 6.5.
x 1 pcs
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information