PPE ring bolt
Plain steel ring bolt PPE EN795
SCR-RG-PSA-EN795-1P-M12
Register now and access more than 125,000 products
- For use as an anchor device for a safety harness in accordance with EN 361 using a suitable connection element in accordance with EN 362
- The anchor device is designed so that it can only be unscrewed using the special key provided.
- The threaded hole must run at a right angle to the contact surface
- Tighten the anchor bolt until it lies fully on the contact surface
- If the anchor device is dropped or there are any doubts about its suitability for use, the system must be replaced immediately
Certified according to standard EN-795-0426
Datasheets(X)
CAD data (available after login)
 | |
People load-carrying capacity | 1 |
Material | Steel |
Surface | Plain |
Thread type x nominal diameter (d1) | M12 |
Length (l) | 18 mm |
Thread length (metric thread) (l1) | 18 mm |
Height (h1) | 53.5 mm |
Ring height (b1) | 11 mm |
Ring thickness (s1) | 11 mm |
Internal diameter (d2) | 34 mm |
Outer diameter (d3) | 56 mm |
Diameter of contact surface (d4) | 44 mm |
Max. torque | 28 Nm |
Product weight (per item) | 350.000 g |
Last viewed
Machine screw tap HSCo blue ring through hole DIN 371/376
Threaded rod DIN 976, A2-70 stainless steel, shape A
KPF wide sanding belt, individual
Hexagon socket set screw with truncated cone ISO 4026 A2 stainless steel 21H, plain
Sanding belt, wide VSM RK700X
Screw with flattened half round head with collar and hexagon socket ISO 7380-2, steel, strength class 10.9, zinc-nickel-plated, black (ZNBHL)
T-shape multi-port distributor with plug-in connector, reducing
Lock plate with tabs
Countersunk tapping screw type C with H recessed head ISO 7050, A2 stainless steel, plain
Spiral clamping pin, standard design ISO 8750 steel plain