PPE ring bolt
Plain steel ring bolt PPE EN795
SCR-RG-PSA-EN795-2P-M16
Register now and access more than 125,000 products
- For use as an anchor device for a safety harness in accordance with EN 361 using a suitable connection element in accordance with EN 362
- The anchor device is designed so that it can only be unscrewed using the special key provided.
- The threaded hole must run at a right angle to the contact surface
- Tighten the anchor bolt until it lies fully on the contact surface
- If the anchor device is dropped or there are any doubts about its suitability for use, the system must be replaced immediately
Certified according to standard EN-795-0426
Datasheets(X)
CAD data (available after login)
 | |
People load-carrying capacity | 2 |
Material | Steel |
Surface | Plain |
Thread type x nominal diameter (d1) | M16 |
Length (l) | 74 mm |
Thread length (metric thread) (l1) | 24 mm |
Height (h1) | 59.5 mm |
Ring height (b1) | 13 mm |
Ring thickness (s1) | 14.5 mm |
Internal diameter (d2) | 39 mm |
Outer diameter (d3) | 65 mm |
Diameter of contact surface (d4) | 56 mm |
Max. torque | 70 Nm |
Product weight (per item) | 796.500 g |
Last viewed
Hexagonal bolt with shank DIN 931, steel 10.9, plain
HSCo Multi Longlife machine tap for through holes DIN 371/376
Shoe accessories
Hexagon Socket Head Cap Screw
Short-sleeved business shirt
EPS profile double cylinder
Adjustable foot ORSY®Flex
Amo® III 7.5 type 3 window frame screw Half round head
Low-cut safety shoes, S3
Spirit level straight edge with bubbles