PRCD-S+ safety distributor
Safety distributor PRCD-S+
DISTR-(PRCD-S+)-CUPL-1FOLD-(H07RN-F)-3M
Register now and access more than 125,000 products
- Portable fault current circuit breaker with differentiated measuring current ≤ 30 mA for alternating currents, pulsing direct fault currents, and phased fault currents
- Intermediate in-line device for direct connection in the line
- Detects measuring errors (e.g. wearing of gloves) and does not switch on
- Fully automatic testing of correct connection conditions
- Switches off L and N in fault situations, protective conductor circuit remains closed
- Protective conductor circuit is switched on in advance and switched off afterwards
- Protection against overvoltage and undervoltage
- Detects plant faults
Datasheets(X)
Reliable, mobile personal protection against faulty electrical installations on construction and assembly sites
Not for use in:
- Refrigerators or other applications
- Machines with high switch-on currents
- IT current networks (isolating transformers, current generators, etc.)
Cable outlet | Solid-rubber connector with 3 m cable |
Cable type | H07RN-F3G1.5 mm² |
Length | 3000 mm |
Nominal current | 16 A |
Frequency | 50 Hz |
Nominal residual current | 30 mA |
Nominal voltage | 230 V/AC |
IP protection class | IP 44 |
Cable connection | Solid rubber plug |
Min./max. operating temperature | -25 to 45 °C |
Last viewed
End cap set for Redoslide Z100-G sliding door fitting set, for aluminium clip front panel
T-piece, with solder connection on all sides EN1254, copper, 5130
EPS profile thumbturn cylinder
Aluminium eccentric lever with female thread
Dustpan
System workshop trolley BASIC 8.4
Bit retainer For ASSY screws
Screw, hexagon head, inch
Handle For workshop trolleys
DUO wire end ferrule With plastic sleeve