PREMIUM fabric masking tape

Name: PREMIUM fabric masking tape
Brand: Würth
SKU: 0992400038

Long-life fabric cover tape
MASKTPE-WOVN-LONGTERM-38MMX25M
ZEBRA

Art.-no. 0992400038

EAN 4024835871570

All versions

Specification

PE-coated fabric tape for long-term masking work for indoor and outdoor use with high initial adhesion

UV filter as intermediate layer

The black PE intermediate layer filters out UV rays, thereby allowing outdoor use.

UV-stabilised rubber adhesive

Experience shows that the tape can be removed from many substrates including outdoors within up to 4 weeks without leaving residue.

High-quality rubber adhesive with high initial adhesion

Excellent adhesion on all non-porous substrates found in the construction sector, e.g. wood, metal, stone.

Can be torn off by hand

Fast, easy application (can be torn both lengthways and crossways).

Dimensionally stable

Completely straight masking is possible.

Notice

To ensure residue-free removal, the maximum duration of use should not exceed 4 weeks. The maximum adhesion time can vary, depending on exposure to direct sunlight and season.

Consider the surface temperature of metals in direct sunlight. Do not apply to very warm surfaces.

Plastic surfaces containing softeners may cause residue to be left behind.

The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. If our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products. Please observe the technical data sheet!

Application

Application area

For protecting surfaces during painting, plastering and stucco plastering both indoors and outdoors. For attaching and adhering covering materials such as films and paper webs or when applying heat insulation. For protecting e.g. window profiles against soiling from painting materials and scratching made by plastering materials and tools.

Suitable for common trade surfaces such as plain and painted metals, hard PVC, painted wood, stone, masonry.

Not suitable for porous and absorbent surfaces such as porous natural stone, marble, granite, concrete and untreated wood. Discolouration may occur on these surfaces.

Not suitable for plastics containing plasticisers, such as soft PVC, PP, PE etc.

Instructions

The surfaces to be adhered must be fully dry, stable and free from dust, grease and oil. Do not use on weathered or damaged surfaces. Top coat must adhere well to the surface. Porous and absorbent surfaces must be pre-treated with primer.

Technical information

Backing material	PE-coated fabric
Adhesive base	Natural rubber adhesive
Colour	Black/white (base material)
Length	25 m
Width	38 mm
Thickness of adhesive tape	300 µm
Min./max. processing temperature	-5 to 35 °C
Min./max. temperature resistance	-15 to 50 °C
Dynamic peel strength at 25 mm	8 N
Tensile strength / conditions	150 N/mm² / in accordance with EN 14410
Elongation at break/conditions	12 % / in accordance with DIN EN 14410
Moisture resistance	Yes
Ultraviolet resistance	4 weeks
Shelf life from production/conditions	15 Month / storage area that is dry, dust-free, protected from sunlight and other heat sources, approx. 20°C, 50% humidity
Resistance against	Weather