PRINETO external bending spring
PRINETO external bending spring
EXBNDSPG-PRINETO-16
Art.-no. 0878682101
EAN 4099618586354
Register now and access more than 125,000 products
- For manual bending of PRINETO HD pipe
- Allows narrow bending radii without the risk of buckling or severe tapering in the bending area
Minimum bending radius for HD pipe 16 and 20 (relative to the centre of the pipe) = 4.5 x pipe outer diameter, can be achieved with bending springs or bending devices with lateral guide. Warm bending is not recommended. Even when warming with a hot air unit, damage to the microstructure cannot be ruled out.
Datasheets(X)
Suitable for plastic pipes (Prineto) | DN.. 16.. |
Length | 520 mm |
Height | 22 mm |
Width | 22 mm |
Suitable for pipe diameter | 16 mm |
Material | Steel |
Colour | Silver |
Surface | Zinc plated/coated |
Last viewed
Raised countersunk head screw with Z recessed head DIN 966, A2 stainless steel, plain
Hexagon head bolt DIN EN 14399-4, steel 10.9, hot-dip galvanised (hdg), for high-strength structural bolting assembly
Shower pan Linear, super flat
EPS profile thumbturn cylinder
Strip for Clipster unprinted number plate holder
Threaded rod DIN 976-1 (type A) with standard metric ISO thread, A4 stainless steel
WÜTOX CS fittings screw Zinc-plated steel, full thread, countersunk head
Straight male fitting ISO 8434-1, zinc-nickel-plated steel, BSPP male thread with seal
Hexagon bolt with thread up to the head DIN 933, A4 80 stainless steel, plain
Hexagon nut, inch ASME B18.2.2, yellow zinc plated GR8 steel, UNC (comparable with ISO metric thread)