PRIPRESS ® connector
Connector PRIPRESS
CON-PRIPRESS-26
Register now and access more than 125,000 products
- Quick and easy installation
- No deburring or calibration required, resulting in up to 30 % shorter installation times
- Optimum safety during installation
- Releasing indicates whether pressing has been forgotten as the connection is not leak-tight when in an unpressed state
- Can be processed with conventional press tools (with TH press contours)
- DVGW/ÖVGW tested and approved
- Suitable for compressed-air systems up to 15 bar
Drinking water and heating installations
Connection, tube diameter | 26 mm |
Connection, tube diameter 2 | 26 mm |
Material | Brass CW725R |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
pias® drilling screw with hexagon head and drill tip Case-hardened steel, zinc-plated, blue passivated
Screw with flattened half round head and hexagon socket ISO 7380-1 steel 010.9, plain
90° angled male fitting ISO 8434-1, zinc-nickel-plated steel, tapered BSPT male thread
Concealed slide full-extension slide Dynapro With integrated soft-close system
Cable tie KBL 1 made of polyamide with plastic tongue
Wet/dry filter bag, fleece
Countersunk head screw with square neck DIN 608, steel 10.9, plain
Drawer divider set, BASIC, 9 compartments
Special tool - adapter For pressure loss tester
Blind rivet, open, with break mandrel and countersunk head ISO 15980, countersunk head, steel/steel
