Welcome to Würth Aerospace Solutions For trade customers only

PROTECT commercial vehicle foam cleaner

Commercial vehicle foam cleaner PROTECT
CLNR-TR-FOAM-PROTECT-20LTR

Art.-no. 0893045009
EAN 4065746734080

Prices for customers after login
PROTECT commercial vehicle foam cleaner

Art.-no. 0893045009

Prices for customers after login
Quantity
PU
x 1 pcs

Exclusively for trade customers

Register now and access more than 125,000 products

Gives surfaces a beautiful streak-free shine, a smooth surface and long-lasting, extremely water-repellent protection
  • Intensive concentrate with lotus effect

  • A special, foam-based product with a high proportion of care products

  • Adds a sheen to painted and plastic surfaces

  • The vehicle is effectively protected from weather and other environmental influences

  • Cleans and protects all motor vehicles, buses, trailers etc.
Notice

Caution, do not allow to dry. Do not use on warm surfaces or in intense sunlight. Before application, test material compatibility in an inconspicuous area.

The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We ensure the consistent quality of our products. We reserve the right to make technical changes and further develop products. Please observe the technical data sheet!

Product information

Datasheets(X)

Safety data sheet

Certificates/ Documents

 | 

 | 

Application area

Suitable for painted surfaces, tarpaulins, screens, plastic parts, rims, chrome, headlights etc.

Instructions

The cleaner must be used in diluted form (1 % to 5 %). PROTECT commercial vehicle foam cleaner can be mixed with warm or cold water. Warm water promotes the cleaning effect and reduces the application time. Depending on the degree of soiling and the dilution, allow to take effect for approx. 5-15 minutes.


Ideally apply with a foam gun, spray lance, high-pressure cleaner or spray arch. Then thoroughly spray off residue with a concentrated water jet.

Contents

20 l

Product weight (per item)

21.200 kg

Container

Canister

Chemical basis

Alkaline tenside

Colour

White

Density/conditions

1.02 g/cm³ / at 20°C

Shelf life from production

24 Month

Phosphate-free

Yes

Sustainability

Pollutants / Emissions

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information