PSA ring bolt, stainless steel, long version
Stainless steel ring bolt PSA EN795 var. screw le.
BLT-RG-LNG-PSA-EN795-SST-1P-M12
Register now and access more than 125,000 products
- Attachment system for a safety harness in accordance with EN 361 using a suitable connection element in accordance with EN 362
- The attachment system is designed so that it can only be (un)screwed using the special key provided.
The sling swivel must always be fully screwed into the component. If the attachment system is dropped or there are any doubts about its suitability for use, the system must be replaced immediately.
Suitable for the safe lifting of personnel in accordance with EN 795
Datasheets(X)
CAD data (available after login)
 | |
People load-carrying capacity | 1 |
Material | Stainless steel |
Surface | Plain |
Thread type x nominal diameter (d1) | M12 |
Length (l) | 150 mm |
Thread length (metric thread) (l1) | 150 mm |
Height (h1) | 53.5 mm |
Ring height (b1) | 11 mm |
Ring thickness (s1) | 11 mm |
Internal diameter (d2) | 34 mm |
Outer diameter (d3) | 56 mm |
Diameter of contact surface (d4) | 44 mm |
Max. torque | 25 Nm |
Product weight (per item) | 460 g |
Last viewed
Fall arrester - counterweight
Work trousers
Rectangular rail set Nova Pro Scala For H90 pot drawer with wooden back panel
Flat brush WB For water-based paints
Aviation inch nyloc nut MS 21044, cadmium-plated steel
Metric double open-end wrench DIN 3110/ISO 1085
Partial exoskeleton Ottobock CX Cool Sleeves cool sleeve arm
Double-end box wrench, deep depressed centre 8 pieces
Storage box with cover
Corrugated pipe PP-MOD