PVC pneumatic hose
PVC pneumatic hose
PNHOSE-KIT-SR-ID13,0MM-L10M-1/4ET
Register now and access more than 125,000 products
High operating comfort and a wide range of application possibilities
Low weight
Reduced risk of injury
Kits are pressed with sleeves. As a result, there are no protruding parts as with conventional hose clamps.
Ideal for use both indoors and outdoors
Highly resistant to UV rays, oil and petrol
Long life span
The surface is resistant to shocks and being stepped on
Datasheets(X)
Compressed air supply for tools, pneumatic machine control, ideal for use in the workshop and on the construction site
Inner hose diameter | 13 mm |
Outer diameter of hose (A) | 19 mm |
Length (L) | 10 m |
Design | With 1/4 inch external thread |
Bending radius | 40 mm |
Min./max. temperature conditions | -15 to 65 °C |
Burst pressure | 64 bar |
Max. operating pressure | 16 bar |
Colour | Blue |
Material | PVC - Polyvinyl chloride |
Last viewed
Knurled nut, high profile DIN 466, brass, plain
Jacket Planam BW 290
EPS profile double cylinder for keyed-alike original systems
SNAP marker
Castellated nut, low profile DIN 979, steel 05, plain
Hex head screw with shank ISO 4014, steel 8.8, zinc-plated, blue passivated (A2K)
Metal core drill bit Ruko solid carbide plain with thread holder
Hexagon Socket Head Cap Screw full thread ISO 4762/DIN 912, steel 8.8, plain, with full thread
Seaming pliers, curved 45 degrees
Ducting clamp Part 1 – Light series