PVC pneumatic hose
PVC pneumatic hose
PNHOSE-KIT-SR-ID9,5MM-L10M-1/4ET
Register now and access more than 125,000 products
High operating comfort and a wide range of application possibilities
Low weight
Reduced risk of injury
Kits are pressed with sleeves. As a result, there are no protruding parts as with conventional hose clamps.
Ideal for use both indoors and outdoors
Highly resistant to UV rays, oil and petrol
Long life span
The surface is resistant to shocks and being stepped on
Datasheets(X)
Compressed air supply for tools, pneumatic machine control, ideal for use in the workshop and on the construction site
Inner hose diameter | 9.5 mm |
Outer diameter of hose (A) | 14.5 mm |
Length (L) | 10 m |
Design | With 1/4 inch external thread |
Bending radius | 40 mm |
Min./max. temperature conditions | -15 to 65 °C |
Burst pressure | 64 bar |
Max. operating pressure | 16 bar |
Colour | Blue |
Material | PVC - Polyvinyl chloride |
Last viewed
Work jacket
Hexagonal bolt with shank
Nylon Sanding Fleece Suitable for manual and machine use
Heat protection glove Ejendals TEGERA® 585
Triangular Spoon scraper With wooden handle
Work trousers Kübler Image Dress New Design 2346 3411
HSCo centre drill bit For carbide cylinder saw Heavy Duty
Socket contact Micro Quadlok System (MQS) 0.63 Uninsulated
Hexagon head bolt With thin shaft in hygienic design
Container and lighting distributor W-VEB 63/KL0-12 With dimmer switch/light sensor