PVC single core H05/H07V-K, fine wire
Single conductor wire electric H05/H07V-K
SNGLCONDWRE-H05V-K-GN-0,5SMM
Register now and access more than 125,000 products
- Devices
- Switchgears
- Distributors
- Protected routing, e.g. in lights.
- Installation in pipes (surface, inside and flush-mounted)
- Closed cable routing conduits
- Direct routing on trays, channels and tubs only as equipotential bonding conductor
- The following colours are recommended (single colour only): black, white, blue, grey, brown, red, orange, turquoise, violet and pink.
- Two-colour combinations are not permitted, except for green-yellow.
- Colours yellow, green and transparent only available in (H)07V-K.
- Two-colour combination only permitted for (H)07V-K.
- Approved for the internal wiring of devices, distributors and switchgears as well as for protected installation in and on lights with a rated voltage of up to 1000 V AC or a DC voltage of up to 750 V against ground.
Datasheets(X)
Wire cross section | 0.5 mm² |
Length | 100 m |
Diameter | 2.5 mm |
Material | Copper |
Insulating material | PVC |
Colour | Green |
Last viewed
Red brass extensions With DVGW (German Technical and Scientific Association for Gas and Water) GW 393 approval (sizes from ½ inch x 17.5 mm)
Hole puncher with splitting punch Metric ISO sizes in accordance with EN 50262
Twist drill bit HSCo DIN 340 type RN OXIDE
AW® C 6.3 bit (1/4 inch) with patented AW tip and colour coding
Strip for number plate holder Clipster, printed
Low-cut safety shoes, S1
Hexagonal bolt with shank and fine thread
G-fuse 5x20
Flange tube for folding mobile scaffolding 75/180
Feather key, high profile DIN 6885, steel C 45 K, plain, shape A