PVC single core H05/H07V-K, fine wire
Single conductor wire electric H05/H07V-K
SNGLCONDWRE-H05V-K-GY-0,5SMM
Register now and access more than 125,000 products
- Devices
- Switchgears
- Distributors
- Protected routing, e.g. in lights.
- Installation in pipes (surface, inside and flush-mounted)
- Closed cable routing conduits
- Direct routing on trays, channels and tubs only as equipotential bonding conductor
- The following colours are recommended (single colour only): black, white, blue, grey, brown, red, orange, turquoise, violet and pink.
- Two-colour combinations are not permitted, except for green-yellow.
- Colours yellow, green and transparent only available in (H)07V-K.
- Two-colour combination only permitted for (H)07V-K.
- Approved for the internal wiring of devices, distributors and switchgears as well as for protected installation in and on lights with a rated voltage of up to 1000 V AC or a DC voltage of up to 750 V against ground.
Datasheets(X)
Wire cross section | 0.5 mm² |
Length | 100 m |
Diameter | 2.5 mm |
Material | Copper |
Insulating material | PVC |
Colour | Grey |
Last viewed
Slotted set screw with pin DIN 417, steel, 14H, plain
Clamping pin/clamping sleeve ISO 13337 spring steel plain
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, plain
90° angled bulkhead fitting ISO 8434-1, zinc-nickel-plated steel
Hexagonal bolt with shank DIN 931, steel 10.9, zinc-plated, blue passivated (A2K)
Hexagonal bolt
Cover cap for profile rail
Chuck For blind rivet attachment tool
Hexagon Socket Head Cap Screw
Mechanical screw-in tool For spigot hinges consisting of two and three pieces