PVC single core H05/H07V-K, fine wire
Single conductor wire electric H05/H07V-K
SNGLCONDWRE-H07V-K-BL-RAL5015-4,0SMM
Register now and access more than 125,000 products
- Devices
- Switchgears
- Distributors
- Protected routing, e.g. in lights.
- Installation in pipes (surface, inside and flush-mounted)
- Closed cable routing conduits
- Direct routing on trays, channels and tubs only as equipotential bonding conductor
- The following colours are recommended (single colour only): black, white, blue, grey, brown, red, orange, turquoise, violet and pink.
- Two-colour combinations are not permitted, except for green-yellow.
- Colours yellow, green and transparent only available in (H)07V-K.
- Two-colour combination only permitted for (H)07V-K.
- Approved for the internal wiring of devices, distributors and switchgears as well as for protected installation in and on lights with a rated voltage of up to 1000 V AC or a DC voltage of up to 750 V against ground.
Datasheets(X)
Wire cross section | 4 mm² |
Length | 100 m |
Diameter | 4.8 mm |
Material | Copper |
Insulating material | PVC |
Colour | Sky blue RAL 5015 |
Last viewed
Hexagon Socket Head Cap Screw
Hexagonal bolt with shank and fine thread ISO 8765, steel 8.8, zinc-plated, blue passivated (A2K)
Hexagon weld nuts DIN 929, steel, plain
VARIFIX® Systemfix 41 quick fastener With threaded rod
Hexagonal bolt with thread up to the head
Low-cut safety shoes, S2
Hex head screw with shank ISO 4014, steel 8.8, zinc-plated, blue passivated (A2K)
TIME-SERT® threaded bushing
AW® C 6.3 bit (1/4 inch) with patented AW tip and colour coding
Countersunk tapping screw, shape C with hexalobular drive ISO 14586, steel, zinc-plated, blue passivated, shape C (with tip)